Name(Required)
Deal ID for this job in ActiveCampaign
Location of Job

Line Item 1

NOTE: Do not use commas in this field, it will break the integration. Also be as detailed as possible describing what needs to be painted.
Hidden
Enter Linear Feet or number of items here for items priced by linear feet, or by number of items.
For items measured by the item or linear feet (cabinets, steps, shutters, doors, fencing, fascia, etc) Leave width as 1, and enter the number of items or linear feet in the length box.
Instructions for Item Cost Multiplier:
For Interior areas:
Use values less than 1 if you will only be painting a portion of the room. Use values more than 1 if you need to increase cost due to high ceilings, intricate molding, or any other reason.
For Cabinets: Sand and refinish .55, Priming .15, 1st coat .15, 2nd coat .15
Fence Painting use .5 if only painting a single side

Item 2

NOTE: Do not use commas in this field, it will break the integration. Also be as detailed as possible describing what needs to be painted.
Hidden
Enter Linear Feet or number of items here for items priced by linear feet, or by number of items.
For items measured by the item or linear feet (cabinets, steps, shutters, doors, fencing, fascia, etc) Leave width as 1, and enter the number of items or linear feet in the length box.
Instructions for Item Cost Multiplier:
For Interior areas:
Use values less than 1 if you will only be painting a portion of the room. Use values more than 1 if you need to increase cost due to high ceilings, intricate molding, or any other reason.
For Cabinets: Sand and refinish .55, Priming .15, 1st coat .15, 2nd coat .15
Fence Painting use .5 if only painting a single side

Item 3

NOTE: Do not use commas in this field, it will break the integration. Also be as detailed as possible describing what needs to be painted.
Hidden
Enter Linear Feet or number of items here for items priced by linear feet, or by number of items.
For items measured by the item or linear feet (cabinets, steps, shutters, doors, fencing, fascia, etc) Leave width as 1, and enter the number of items or linear feet in the length box.
Instructions for Item Cost Multiplier:
For Interior areas:
Use values less than 1 if you will only be painting a portion of the room. Use values more than 1 if you need to increase cost due to high ceilings, intricate molding, or any other reason.
For Cabinets: Sand and refinish .55, Priming .15, 1st coat .15, 2nd coat .15
Fence Painting use .5 if only painting a single side

Item 4

NOTE: Do not use commas in this field, it will break the integration. Also be as detailed as possible describing what needs to be painted.
Hidden
Enter Linear Feet or number of items here for items priced by linear feet, or by number of items.
For items measured by the item or linear feet (cabinets, steps, shutters, doors, fencing, fascia, etc) Leave width as 1, and enter the number of items or linear feet in the length box.
Instructions for Item Cost Multiplier:
For Interior areas:
Use values less than 1 if you will only be painting a portion of the room. Use values more than 1 if you need to increase cost due to high ceilings, intricate molding, or any other reason.
For Cabinets: Sand and refinish .55, Priming .15, 1st coat .15, 2nd coat .15
Fence Painting use .5 if only painting a single side

Item 5

NOTE: Do not use commas in this field, it will break the integration. Also be as detailed as possible describing what needs to be painted.
Hidden
Enter Linear Feet or number of items here for items priced by linear feet, or by number of items.
For items measured by the item or linear feet (cabinets, steps, shutters, doors, fencing, fascia, etc) Leave width as 1, and enter the number of items or linear feet in the length box.
Instructions for Item Cost Multiplier:
For Interior areas:
Use values less than 1 if you will only be painting a portion of the room. Use values more than 1 if you need to increase cost due to high ceilings, intricate molding, or any other reason.
For Cabinets: Sand and refinish .55, Priming .15, 1st coat .15, 2nd coat .15
Fence Painting use .5 if only painting a single side

Item 6

NOTE: Do not use commas in this field, it will break the integration. Also be as detailed as possible describing what needs to be painted.
Hidden
Enter Linear Feet or number of items here for items priced by linear feet, or by number of items.
For items measured by the item or linear feet (cabinets, steps, shutters, doors, fencing, fascia, etc) Leave width as 1, and enter the number of items or linear feet in the length box.
Instructions for Item Cost Multiplier:
For Interior areas:
Use values less than 1 if you will only be painting a portion of the room. Use values more than 1 if you need to increase cost due to high ceilings, intricate molding, or any other reason.
For Cabinets: Sand and refinish .55, Priming .15, 1st coat .15, 2nd coat .15
Fence Painting use .5 if only painting a single side

Item 7

NOTE: Do not use commas in this field, it will break the integration. Also be as detailed as possible describing what needs to be painted.
Hidden
Enter Linear Feet or number of items here for items priced by linear feet, or by number of items.
For items measured by the item or linear feet (cabinets, steps, shutters, doors, fencing, fascia, etc) Leave width as 1, and enter the number of items or linear feet in the length box.
Instructions for Item Cost Multiplier:
For Interior areas:
Use values less than 1 if you will only be painting a portion of the room. Use values more than 1 if you need to increase cost due to high ceilings, intricate molding, or any other reason.
For Cabinets: Sand and refinish .55, Priming .15, 1st coat .15, 2nd coat .15
Fence Painting use .5 if only painting a single side

Item 8

NOTE: Do not use commas in this field, it will break the integration. Also be as detailed as possible describing what needs to be painted.
Hidden
Enter Linear Feet or number of items here for items priced by linear feet, or by number of items.
For items measured by the item or linear feet (cabinets, steps, shutters, doors, fencing, fascia, etc) Leave width as 1, and enter the number of items or linear feet in the length box.
Instructions for Item Cost Multiplier:
For Interior areas:
Use values less than 1 if you will only be painting a portion of the room. Use values more than 1 if you need to increase cost due to high ceilings, intricate molding, or any other reason.
For Cabinets: Sand and refinish .55, Priming .15, 1st coat .15, 2nd coat .15
Fence Painting use .5 if only painting a single side

Item 9

NOTE: Do not use commas in this field, it will break the integration. Also be as detailed as possible describing what needs to be painted.
Hidden
Enter Linear Feet or number of items here for items priced by linear feet, or by number of items.
For items measured by the item or linear feet (cabinets, steps, shutters, doors, fencing, fascia, etc) Leave width as 1, and enter the number of items or linear feet in the length box.
Instructions for Item Cost Multiplier:
For Interior areas:
Use values less than 1 if you will only be painting a portion of the room. Use values more than 1 if you need to increase cost due to high ceilings, intricate molding, or any other reason.
For Cabinets: Sand and refinish .55, Priming .15, 1st coat .15, 2nd coat .15
Fence Painting use .5 if only painting a single side

Item 10

NOTE: Do not use commas in this field, it will break the integration. Also be as detailed as possible describing what needs to be painted.
Hidden
Enter Linear Feet or number of items here for items priced by linear feet, or by number of items.
For items measured by the item or linear feet (cabinets, steps, shutters, doors, fencing, fascia, etc) Leave width as 1, and enter the number of items or linear feet in the length box.
Instructions for Item Cost Multiplier:
For Interior areas:
Use values less than 1 if you will only be painting a portion of the room. Use values more than 1 if you need to increase cost due to high ceilings, intricate molding, or any other reason.
For Cabinets: Sand and refinish .55, Priming .15, 1st coat .15, 2nd coat .15
Fence Painting use .5 if only painting a single side

Item 11

NOTE: Do not use commas in this field, it will break the integration. Also be as detailed as possible describing what needs to be painted.
Hidden
Enter Linear Feet or number of items here for items priced by linear feet, or by number of items.
For items measured by the item or linear feet (cabinets, steps, shutters, doors, fencing, fascia, etc) Leave width as 1, and enter the number of items or linear feet in the length box.
Instructions for Item Cost Multiplier:
For Interior areas:
Use values less than 1 if you will only be painting a portion of the room. Use values more than 1 if you need to increase cost due to high ceilings, intricate molding, or any other reason.
For Cabinets: Sand and refinish .55, Priming .15, 1st coat .15, 2nd coat .15
Fence Painting use .5 if only painting a single side

Item 12

NOTE: Do not use commas in this field, it will break the integration. Also be as detailed as possible describing what needs to be painted.
Hidden
Enter Linear Feet or number of items here for items priced by linear feet, or by number of items.
For items measured by the item or linear feet (cabinets, steps, shutters, doors, fencing, fascia, etc) Leave width as 1, and enter the number of items or linear feet in the length box.
Instructions for Item Cost Multiplier:
For Interior areas:
Use values less than 1 if you will only be painting a portion of the room. Use values more than 1 if you need to increase cost due to high ceilings, intricate molding, or any other reason.
For Cabinets: Sand and refinish .55, Priming .15, 1st coat .15, 2nd coat .15
Fence Painting use .5 if only painting a single side

Item 13

NOTE: Do not use commas in this field, it will break the integration. Also be as detailed as possible describing what needs to be painted.
Hidden
Enter Linear Feet or number of items here for items priced by linear feet, or by number of items.
For items measured by the item or linear feet (cabinets, steps, shutters, doors, fencing, fascia, etc) Leave width as 1, and enter the number of items or linear feet in the length box.
Instructions for Item Cost Multiplier:
For Interior areas:
Use values less than 1 if you will only be painting a portion of the room. Use values more than 1 if you need to increase cost due to high ceilings, intricate molding, or any other reason.
For Cabinets: Sand and refinish .55, Priming .15, 1st coat .15, 2nd coat .15
Fence Painting use .5 if only painting a single side

Item 14

NOTE: Do not use commas in this field, it will break the integration. Also be as detailed as possible describing what needs to be painted.
Hidden
Enter Linear Feet or number of items here for items priced by linear feet, or by number of items.
For items measured by the item or linear feet (cabinets, steps, shutters, doors, fencing, fascia, etc) Leave width as 1, and enter the number of items or linear feet in the length box.
Instructions for Item Cost Multiplier:
For Interior areas:
Use values less than 1 if you will only be painting a portion of the room. Use values more than 1 if you need to increase cost due to high ceilings, intricate molding, or any other reason.
For Cabinets: Sand and refinish .55, Priming .15, 1st coat .15, 2nd coat .15
Fence Painting use .5 if only painting a single side

Item 15

NOTE: Do not use commas in this field, it will break the integration. Also be as detailed as possible describing what needs to be painted.
Hidden
Enter Linear Feet or number of items here for items priced by linear feet, or by number of items.
For items measured by the item or linear feet (cabinets, steps, shutters, doors, fencing, fascia, etc) Leave width as 1, and enter the number of items or linear feet in the length box.
Instructions for Item Cost Multiplier:
For Interior areas:
Use values less than 1 if you will only be painting a portion of the room. Use values more than 1 if you need to increase cost due to high ceilings, intricate molding, or any other reason.
For Cabinets: Sand and refinish .55, Priming .15, 1st coat .15, 2nd coat .15
Fence Painting use .5 if only painting a single side

Item 16

NOTE: Do not use commas in this field, it will break the integration. Also be as detailed as possible describing what needs to be painted.
Hidden
Enter Linear Feet or number of items here for items priced by linear feet, or by number of items.
For items measured by the item or linear feet (cabinets, steps, shutters, doors, fencing, fascia, etc) Leave width as 1, and enter the number of items or linear feet in the length box.
Instructions for Item Cost Multiplier:
For Interior areas:
Use values less than 1 if you will only be painting a portion of the room. Use values more than 1 if you need to increase cost due to high ceilings, intricate molding, or any other reason.
For Cabinets: Sand and refinish .55, Priming .15, 1st coat .15, 2nd coat .15
Fence Painting use .5 if only painting a single side

Item 17

NOTE: Do not use commas in this field, it will break the integration. Also be as detailed as possible describing what needs to be painted.
Hidden
Enter Linear Feet or number of items here for items priced by linear feet, or by number of items.
For items measured by the item or linear feet (cabinets, steps, shutters, doors, fencing, fascia, etc) Leave width as 1, and enter the number of items or linear feet in the length box.
Instructions for Item Cost Multiplier:
For Interior areas:
Use values less than 1 if you will only be painting a portion of the room. Use values more than 1 if you need to increase cost due to high ceilings, intricate molding, or any other reason.
For Cabinets: Sand and refinish .55, Priming .15, 1st coat .15, 2nd coat .15
Fence Painting use .5 if only painting a single side

Item 18

NOTE: Do not use commas in this field, it will break the integration. Also be as detailed as possible describing what needs to be painted.
Hidden
Enter Linear Feet or number of items here for items priced by linear feet, or by number of items.
For items measured by the item or linear feet (cabinets, steps, shutters, doors, fencing, fascia, etc) Leave width as 1, and enter the number of items or linear feet in the length box.
Instructions for Item Cost Multiplier:
For Interior areas:
Use values less than 1 if you will only be painting a portion of the room. Use values more than 1 if you need to increase cost due to high ceilings, intricate molding, or any other reason.
For Cabinets: Sand and refinish .55, Priming .15, 1st coat .15, 2nd coat .15
Fence Painting use .5 if only painting a single side

Item 19

NOTE: Do not use commas in this field, it will break the integration. Also be as detailed as possible describing what needs to be painted.
Hidden
Enter Linear Feet or number of items here for items priced by linear feet, or by number of items.
For items measured by the item or linear feet (cabinets, steps, shutters, doors, fencing, fascia, etc) Leave width as 1, and enter the number of items or linear feet in the length box.
Instructions for Item Cost Multiplier:
For Interior areas:
Use values less than 1 if you will only be painting a portion of the room. Use values more than 1 if you need to increase cost due to high ceilings, intricate molding, or any other reason.
For Cabinets: Sand and refinish .55, Priming .15, 1st coat .15, 2nd coat .15
Fence Painting use .5 if only painting a single side

Item 20

NOTE: Do not use commas in this field, it will break the integration. Also be as detailed as possible describing what needs to be painted.
Hidden
Enter Linear Feet or number of items here for items priced by linear feet, or by number of items.
For items measured by the item or linear feet (cabinets, steps, shutters, doors, fencing, fascia, etc) Leave width as 1, and enter the number of items or linear feet in the length box.
Instructions for Item Cost Multiplier:
For Interior areas:
Use values less than 1 if you will only be painting a portion of the room. Use values more than 1 if you need to increase cost due to high ceilings, intricate molding, or any other reason.
For Cabinets: Sand and refinish .55, Priming .15, 1st coat .15, 2nd coat .15
Fence Painting use .5 if only painting a single side

Item 21

NOTE: Do not use commas in this field, it will break the integration. Also be as detailed as possible describing what needs to be painted.
Hidden
Enter Linear Feet or number of items here for items priced by linear feet, or by number of items.
For items measured by the item or linear feet (cabinets, steps, shutters, doors, fencing, fascia, etc) Leave width as 1, and enter the number of items or linear feet in the length box.
Instructions for Item Cost Multiplier:
For Interior areas:
Use values less than 1 if you will only be painting a portion of the room. Use values more than 1 if you need to increase cost due to high ceilings, intricate molding, or any other reason.
For Cabinets: Sand and refinish .55, Priming .15, 1st coat .15, 2nd coat .15
Fence Painting use .5 if only painting a single side

Item 22

NOTE: Do not use commas in this field, it will break the integration. Also be as detailed as possible describing what needs to be painted.
Hidden
Enter Linear Feet or number of items here for items priced by linear feet, or by number of items.
For items measured by the item or linear feet (cabinets, steps, shutters, doors, fencing, fascia, etc) Leave width as 1, and enter the number of items or linear feet in the length box.
Instructions for Item Cost Multiplier:
For Interior areas:
Use values less than 1 if you will only be painting a portion of the room. Use values more than 1 if you need to increase cost due to high ceilings, intricate molding, or any other reason.
For Cabinets: Sand and refinish .55, Priming .15, 1st coat .15, 2nd coat .15
Fence Painting use .5 if only painting a single side

Item 23

NOTE: Do not use commas in this field, it will break the integration. Also be as detailed as possible describing what needs to be painted.
Hidden
Enter Linear Feet or number of items here for items priced by linear feet, or by number of items.
For items measured by the item or linear feet (cabinets, steps, shutters, doors, fencing, fascia, etc) Leave width as 1, and enter the number of items or linear feet in the length box.
Instructions for Item Cost Multiplier:
For Interior areas:
Use values less than 1 if you will only be painting a portion of the room. Use values more than 1 if you need to increase cost due to high ceilings, intricate molding, or any other reason.
For Cabinets: Sand and refinish .55, Priming .15, 1st coat .15, 2nd coat .15
Fence Painting use .5 if only painting a single side

Item 24

NOTE: Do not use commas in this field, it will break the integration. Also be as detailed as possible describing what needs to be painted.
Hidden
Enter Linear Feet or number of items here for items priced by linear feet, or by number of items.
For items measured by the item or linear feet (cabinets, steps, shutters, doors, fencing, fascia, etc) Leave width as 1, and enter the number of items or linear feet in the length box.
Instructions for Item Cost Multiplier:
For Interior areas:
Use values less than 1 if you will only be painting a portion of the room. Use values more than 1 if you need to increase cost due to high ceilings, intricate molding, or any other reason.
For Cabinets: Sand and refinish .55, Priming .15, 1st coat .15, 2nd coat .15
Fence Painting use .5 if only painting a single side

Item 25

NOTE: Do not use commas in this field, it will break the integration. Also be as detailed as possible describing what needs to be painted.
Hidden
Enter Linear Feet or number of items here for items priced by linear feet, or by number of items.
For items measured by the item or linear feet (cabinets, steps, shutters, doors, fencing, fascia, etc) Leave width as 1, and enter the number of items or linear feet in the length box.
Instructions for Item Cost Multiplier:
For Interior areas:
Use values less than 1 if you will only be painting a portion of the room. Use values more than 1 if you need to increase cost due to high ceilings, intricate molding, or any other reason.
For Cabinets: Sand and refinish .55, Priming .15, 1st coat .15, 2nd coat .15
Fence Painting use .5 if only painting a single side

Item 26

NOTE: Do not use commas in this field, it will break the integration. Also be as detailed as possible describing what needs to be painted.
Hidden
Enter Linear Feet or number of items here for items priced by linear feet, or by number of items.
For items measured by the item or linear feet (cabinets, steps, shutters, doors, fencing, fascia, etc) Leave width as 1, and enter the number of items or linear feet in the length box.
Instructions for Item Cost Multiplier:
For Interior areas:
Use values less than 1 if you will only be painting a portion of the room. Use values more than 1 if you need to increase cost due to high ceilings, intricate molding, or any other reason.
For Cabinets: Sand and refinish .55, Priming .15, 1st coat .15, 2nd coat .15
Fence Painting use .5 if only painting a single side

Item 27

NOTE: Do not use commas in this field, it will break the integration. Also be as detailed as possible describing what needs to be painted.
Hidden
Enter Linear Feet or number of items here for items priced by linear feet, or by number of items.
For items measured by the item or linear feet (cabinets, steps, shutters, doors, fencing, fascia, etc) Leave width as 1, and enter the number of items or linear feet in the length box.
Instructions for Item Cost Multiplier:
For Interior areas:
Use values less than 1 if you will only be painting a portion of the room. Use values more than 1 if you need to increase cost due to high ceilings, intricate molding, or any other reason.
For Cabinets: Sand and refinish .55, Priming .15, 1st coat .15, 2nd coat .15
Fence Painting use .5 if only painting a single side

Item 28

NOTE: Do not use commas in this field, it will break the integration. Also be as detailed as possible describing what needs to be painted.
Hidden
Enter Linear Feet or number of items here for items priced by linear feet, or by number of items.
For items measured by the item or linear feet (cabinets, steps, shutters, doors, fencing, fascia, etc) Leave width as 1, and enter the number of items or linear feet in the length box.
Instructions for Item Cost Multiplier:
For Interior areas:
Use values less than 1 if you will only be painting a portion of the room. Use values more than 1 if you need to increase cost due to high ceilings, intricate molding, or any other reason.
For Cabinets: Sand and refinish .55, Priming .15, 1st coat .15, 2nd coat .15
Fence Painting use .5 if only painting a single side

Item 29

NOTE: Do not use commas in this field, it will break the integration. Also be as detailed as possible describing what needs to be painted.
Hidden
Enter Linear Feet or number of items here for items priced by linear feet, or by number of items.
For items measured by the item or linear feet (cabinets, steps, shutters, doors, fencing, fascia, etc) Leave width as 1, and enter the number of items or linear feet in the length box.
Instructions for Item Cost Multiplier:
For Interior areas:
Use values less than 1 if you will only be painting a portion of the room. Use values more than 1 if you need to increase cost due to high ceilings, intricate molding, or any other reason.
For Cabinets: Sand and refinish .55, Priming .15, 1st coat .15, 2nd coat .15
Fence Painting use .5 if only painting a single side

Item 30

NOTE: Do not use commas in this field, it will break the integration. Also be as detailed as possible describing what needs to be painted.
Hidden
Enter Linear Feet or number of items here for items priced by linear feet, or by number of items.
For items measured by the item or linear feet (cabinets, steps, shutters, doors, fencing, fascia, etc) Leave width as 1, and enter the number of items or linear feet in the length box.
Instructions for Item Cost Multiplier:
For Interior areas:
Use values less than 1 if you will only be painting a portion of the room. Use values more than 1 if you need to increase cost due to high ceilings, intricate molding, or any other reason.
For Cabinets: Sand and refinish .55, Priming .15, 1st coat .15, 2nd coat .15
Fence Painting use .5 if only painting a single side
Hidden

Job Total and Pre-Submission Warning

Use this are to note when clients want to use the same or existing colors in rooms or if they have thoughts on colors. Use this area for notes on all items specified during the estimate.

DO NOT SUBMIT THE ESTIMATE - ONE OF THE LINE ITEM DESCRIPTIONS HAS A COMMA IN IT!